This was my first time here. Same day service for oil change and belt replacement for my Mercedes…read moreand they did not charge me to repair a cover that was disconnected and interfering with radiator fan. The cost for the oil change was more than reasonable. (Note: Mercedes Dealership charges more than double for their oil changes and services). Most important, the Attendant and the Mechanics were very friendly. Unlike other Dealerships, they were thorough in explaining their diagnosis; no unnecessary or pressure sales tactics. Now my new Mercedes service center.

My first visit to Kruse. Business is under new ownership…read more New owner was a long term employee of previous owner. Took my limo in for front end alignment. I had just rebuilt the front end. Car handles beautifully. wheel is perfectly level. While in shop Mechanic gravity bled the brakes. Now the pedal is nice and firm again. My alignment was $149 and bleed was $40.50 (he supplied the fluid). The owner runs the shop, and his sister runs the office. They both impressed me as intelligent and pleasant people. They both thanked me more than once for my business. I'll return again.

They always do a good job and I never have to wait. I would recommend this business.read more

As retired veteran always received discount now they want ID…read moreSo now I request an ID lost mine over 15 years ago never replaced Went elsewhere gave me the discount

Trustworthy and honest people here. They don't overcharge you or recommend unnecessary repairs…read more They always make you feel like your concerns are heard. The quality of repairs are good. Highly recommend.

Make sure you ask them to check your transmission fluid while getting an oil changed. they never…read morechecked mine, spent 4300$ on a new one. I called around to other places after this happened and it is standard to check the transmission fluid. Lazy employees.

i own a collision shop (the toy shed LLC) in Waterloo and use Brian's Auto for severe mechanic…read morerelated repairs since we don't have an alignment rack at our shop. They always treat us right and do not overpromise on their delivery times which is amazing. they tell you how it is and i appreciate that in a business because it helps us keep insurance and customers updated on a realistic time frame - not a hopeful one. Good business, quality work, and like always - you get what you pay for

Highly recommended auto repair shop! Great customer service, knowledgeable staff, and caring…read morecompany overall.

Give Tuffy off Dupont road a chance. Tuffy! They get on oil changes and get her done, auto care…read morework, name it Tuffy gets right up on it. Tuffy isn't to bad really...The Dupont location isn't to bad, Tuffy won't get you to bad up in here, he won't do ya wrong or at least very wrong at all. They do pretty good work, young eager guys looking to twist a wrench and get her done the Tuffy way! Tuffy won't stick you to bad, build a relationship with his auto shop, Tuffy won't get ya to bad! Pretty fair guy overall, won't rough you up to bad... Tuffy guarantees it or as in Tuffy's case "GAR-N-TEES IT" Good old Tuffy! Right? Right Tuffy? you might get lucky when you don't get to roughy up'd at Tuffy! Brakes, Mufflers, tires, alternators , No job to big at Tuffy's. Dupont location probably the best Tuffy location, they won't get to roughy with you! Nope not at Tuffy's.

AVOID THIS PLACE!!!…read more On November 28th, 2025, I had my car towed to the Tuffy's on Dupont because it would not start (new battery), and from my multiple failed attempts to start, the clutch pedal had lost pressure. Below is everything that was quoted on my 2008 Honda Civic Si, with 130K miles. I want to note that the ignition knock sensor was accidentally broken by Tuffy, it was communicated to me, but somehow I got stuck with the bill for a new one ($55). Approved Scan codes - $160 Remove/Replace Starter & Ignition Knock sensor $765 Remove/Replace clutch master and slave cylinder & bleed clutch $956 Remove/Replace Axle seals $406 Remove/Replace Tie Rod & alignment $778 Valvoline Brake system flush $113 TOTAL - $3,079.67 Declined Remove/Replace Engine Mount $286 Remove/Replace Suspension Shock rear $436 Remove/Replace Valve cover gasket $258 Remove/Replace Clutch assembly $1,888 TOTAL - $2,869 When I picked up my car, it started, but something was off. Once the car warmed up the idle RPM's were inconsistent and the engine would vibrate horribly. The car also had trouble accelerating and the RPM's were twice as high as usual as I would put the car in neutral to come to a stop. Once in my garage, I noticed the smell of gas fumes and the exhaust was a dark color, and I had a leak. Under the hood, I noticed the intake manifold was dark and dirty on the far right side. The car struggled to start the next day. I took the car back to them and they quickly figured out that there was a gasket that wasn't installed properly and that some packaging had been left behind in the master or slave cylinder. Who knows what they actually did but all those issues did resolve, minus the rough start the leak. I took the car back a second time for the starting issue and nothing was really done, just suggestions of cleaning the throttle body, and making sure the spark plugs that I installed were properly gapped, which they were. This is when they started sticking to the phrase "if the starter is cranking, then it works". Didn't matter that this brand new NAPA Premium Plus Starter (2446993) sounded horrible as it struggled to crank. When I was leaving I noticed my check engine light came on, when it never had been before. They either forgot to reconnect a sensor or they disconnected something without knowing it, I let them know and they fixed it. A few days later I took my car to a family recommended mechanic. The first thing he noticed was that my flywheel looked to be taking damage, and that my axle seals were leaking. I took my car back to Tuffy's for a third time, and they confirmed the leaking axle seals, and claimed that they either mistakenly ordered the wrong ones, or that they were given the wrong ones. They fixed the axle seals and on the rough start they again gave me the line "if the starter is cranking, then it works", so they recommend the following. Remove/Replace Direct Fuel Pump Module Assembly $805 Adjust Valve Lash, Valve cover gasket, NGK High Ignitability Spark Plugs $697 I declined these services and I ordered a Honda Denso OEM fuel pump module assembly, and replaced it myself. After install, there was absolutely no change. The car's rough start issue remained. On February 21st, my clutch pedal had once again lost pressure, and so I brought the car back to them once again (4th time); thinking everything would be covered since they had done all the clutch work, but they quoted me the below. Remove/Replace Clutch Hydraulic line, 3/16 copper brake line, and brake fluid $209.45 I declined these services as well, and took the car back to the recommended mechanic and he said the issue was actually the slave cylinder. Dealing with Tuffy's was pointless, so I had him replace the slave cylinder (paid for the part and labor again) and I also had him go ahead and fully diagnose my starter issue at this point. The starter turned out to be faulty. Thank god the NAPA that Tuffy's had purchased it from was able to provide me with the lifetime warranty on it, and they gave me a new one. I had it installed with a NEW flywheel to ensure this didn't damage the new starter. After all this, my car starts up fine now; no clutch pedal issues. The only items that haven't gone bad that Tuffy's installed are the clutch master cylinder and the tie rod, but I have no confidence in them based on how everything else went.

The mechanic was very efficient and does GREAT work. I highly recommend them to anyoneread more

Outstanding service! Darvin went above and beyond for me when he didn't have to. I'd recommend this…read moreshop again and again!

I've been to Curtis several times now with several vehicles. He definitely knows his stuff. He's…read moredone simple stuff like O2 sensors or greasing brakes to replacing cracked exhaust manifolds and diagnosing issues. He doesn't over charge and is very reasonably priced. One of the only honest mechanics left in Fort Wayne. Just bought a used truck a couple days ago and will be taking it to him soon to get it all checked out. I highly recommend him to everyone.

Had my check engine light on, they diagnosed the issue(s) and provided a quote. Woodward did a…read moregreat job. Kept to the quoted amount and communicated any changes in a timely manner. I will be recommending them to my friends and family.

My wife and I were coming into Fort Wayne from Angola on our way home to Texas, and just as we…read morejumped on to Interstate 65 on the north side of Fort Wayne, we realized that our vehicle was shuddering pretty bad. Just then, the Check Engine light came on and it was blinking, which means BAD! We took nearest exit ramp and limped off the interstate onto Illinois Road parking ourselves in F&M Bank parking lot (Shout out to the nice lady that came over to ask if she could help us!!). On Google Maps, we saw that an AutoZone was just across the interstate (1235 Magnavox Way). We called them up for advice, and after telling them of our predicament, the nice man on the other end of the phone told us that for our year/make/model, shuddering at acceleration could really only be one thing, a cylinder misfire, probably as a result of a bad ignition coil and/or spark plugs. He told us we could limp on over to the AutoZone, and they'd run an OBDII Scan on it to be sure, but he was 99% positive it wasn't nearly as bad as we thought. Upon arrival, they scanned the car and found that it was indeed a cylinder misfire. Being from far away, we asked where would be the best shop to take it to and they steered us toward the Belle Tire shop just across the street (7370 Illinois Rd). As out-of-towners, we would never have even tried that location, because we thought it was only a tire shop. Ends up they have a full service mechanic shop there as well! The gentlemen there at AutoZone were super helpful and even called up Belle Tire shop to make sure they could help us and get us back on the road quick. The Belle Tire folks told us that they were ready for us, so we fired that shaky engine back up and jiggled our way across the street. Those folks got us done quick! They had our vehicle in a bay in 20 minutes, then had it diagnosed, repaired, and back on the road within 2 hours. We broke down and parked at the bank at almost exactly 7 am. We drove out of the Belle Tire shop at almost exactly 10 am. From breakdown to road worthy in 3 hours. The Good Lord was watching out for us, making sure that ignition coil got us into the right place at the right time. Fort Wayne, from the F&M Bank lady to the guys at AutoZone to the crew at Belle Tire, you got a great bunch of people there!! May God bless all of you for helping a couple of mangy old Texans get back on the road!!

Belle has a nice large facility that is clean, modern and comfortable. This facility is hard to…read moreget to as you have to navigate the back alleys. Once you emerge on the building you have to by pass all the open bays to get to the shore front. Once this day there were four desk people working. All were professional in fees and conduct. The were eager to help. I listened to many stories on why a car had problems and what solutions they offered. All were done with respect and non pressure. There were about 10 tech jams working today. Plenty help help to process scheduled appointments and walk ins. Today in choose to make an appointment on line. It was easy to do. They seemed prepared to start my work by time the appointment time arrived. My day was costly than I planned. I feel like they were being honest about my issues. The cost seemed a lot but probably fair. The work took over 3.5 hours. On the down side...I noticed the all important sign going into the shop that required people to wear safety glasses. 9 of 12 people didn't wear safety glasses including 4 management/desk types.