Always professional and they all have a plethora of knowledge. Quality craftsman in all they do to…read moreyour bike. I appreciate the smaller shops as they really know how to treat their customers. Quality work, good prices and keep you up on progress. They have become my go to shop for all my repairs.

From my experience they don't really listen to your problems or just don't care…read more I had them press rear bearings for me and when they did they seated them incorrectly, costing me over $1000 having my wheel hub replaced as well as the 2 lyndall sprocket it chewed up in the process. My fault cause I brought them the bearings apparently. when all that it needed was a rotor spacer $4 part. Not sure how with all the experience in the building that couldn't be deduced... their response was " as long as the rotors not rubbing it's fine" it wasn't anymore cause they pressed the bearings incorrectly.... Still my fault cause I supplied the bearings.... Then they put in a 1250 kit on my sportster in which every gasket leaked atleast twice and I was given some grief at the fact that I wanted a bike that didn't leak from the owner and push back. On top of that I'd been chasing a noise they refused to actually pay attention to and just gave me the run around every time I dropped it off. only to find out doing my own due diligence the bolts they removed to install the kit aren't torqued to spec. I wasn't charged for any of the additional gaskets needed however for the one job my bike saw their shop atleast 5 times that summer, not counting the time I had to re drop it off cause they didn't complete the service I requested. I originally had a better review posted but I'm still leaking oil from my base gasket on the rear cylinder and I'm having to go through my bike and make sure bolts on the drive train are actually tight and I'm constantly wondering what care was taken re building my rocker box's and the other internal parts if I have bolts on the outside loose. Shops beautiful, summers nice. Other than that my experience wasn't great and as it's known for being performance driven I expected to be taken care of much better and I shouldn't have ever even had any push back to having my bike fixed properly.

Had an emergency tire issue over a 5 day ride. TJ Cycles & Offroad was the only shop in western…read moreColorado that was able to help me out. They made me a priority and got me back on the road. Super knowledgable guys and great work. Thanks for fixing me up!

I'm on a cross country road trip and it was time for an oil change and to repair an exhaust leak on…read moremy Harley. TJ got me in right away and took good care of me the next morning. There's a diner next door so I had breakfast while I waited. Great overall experience and I wouldn't hesitate to go back.

Very friendly and knowledgeable service had us in and out for a new tire the prices are very fair…read more A good selection of after market parts for motorcycles bought a new helmet while there.

One of two places in Colorado I would take any of my bikes to be worked on. You can trust these…read moreguys with you life.

We showed up on a busy Saturday afternoon. My bike was running, but needed some TLC after a little…read morecrash or two on the trail. Sean came out to take a look at it and quickly resolved the problem. He also took the time to teach a very non-mechanical me what was going on. I really appreciated that they took the time to help me out so I could feel confident and comfortable getting back on the bike, knowing it was in good mechanical shape. Thank you, Sean.

Amazing shop, have saved out trip more than once. if you need parts or service, these guys are who…read moreto use. I needed a Polaris bolt, they don't sell Polaris but he found me exactly what i needed in his spare parts.

We were up in the Buena Vista area for a 2-day snowmobiling adventure, with family from…read moreMinneapolis. One of the sleds we'd brought with us to ride, was mechanically set-up and jetted to operate at Minnesota elevation and was, basically, "dead" in our Colorado mountains high-elevation. Super disappointing on Day #1, as not everyone could ride - and we only had one more day before the Minnesota family had to fly back home. The next morning, we went straight to Timberline Motorsports when the opened - looking for mercy - and boy! did we get some! We asked if they could immediately work us in (help!) so that everyone could ride on our last day in the mountains. These guys saved our vacation! Awesome mechanic, did a quick troubleshoot, diagnosed the problem and identified parts that would work (on this older sled), and had the thing running great in less than an hour. Absolutely top-notch! And when they handed us the invoice, we couldn't believe how reasonable it was... MUCH less than we expected, for emergency service! So nice of them to understand our plight, take care of everything, and not take advantage price-wise. All of us left there super-impressed with this shop and the folks who run it. Great people - Great business! THANK YOU Timberline MotorSports!

Took my bagger in for new tires, Troy gave me a recommended brand I hadn't really considered but…read moreafter a bit of research on my end turned out to be the best for my riding along with a great value. Both Troy and Sam took the time to explain to me a few adjustments that improved my ride and performance. Highly recommended & trusted group in my opinion.

I asked them to synchronize the 4 carbs on my 1976 Honda cb750. They assured me they knew what…read morethey were doing. They cleaned the carbs and proceeded to drop them, cracking and breaking them without telling me and just covered the damage with the air box. They told me the reason my bike still didn't run was the head gasket. I took the bike to a real mechanic who found their shoddy work, showed me, and proceeded to get my bike running for $300, but my original carbs are destroyed. My head gasket is fine. I will drive all the way to Longmont for a real mechanic rather than go to Bloody Knuckles.

A motorcycle can represent more than just a vesicle for riding to work or to the bar with friends…read more A motorcycle can also represent one's history. At the beginning of September my father sent in his 1977 Harley super glider shovel head motorcycle into Holt's Ham Recycle in Minturn, CO to get it restored for the upcoming summer. He was quoted 5,000$ for this work and was told he would be notified if there were upcoming issues that caused the budget to be gone over. This motorcycle means more to my father than just a vehicle to transport himself. It is also one of the last remaining pieces of equipment from his father, my grandfather. My grandfather passed away in 2004 and the motorcycle was the one thing my dad had left that was physical and wasn't destroyed or given away in the will. This bike is important to my dad and that's why he wanted to get it restored. He was told after months of the bike being at the shop that they would be in fact over budget by over $2,400. My dad paid the money hoping the bike would be in its best shape. Upon arrival home the bike not only didn't turn over it also didn't even stay running when we finally rewired the solenoid for the starter. We then found the gas tank was never filled nor cleaned out before use. So, we cleaned out the tanks and the rusted carburetor and finally it would idle. Upon putting it into gear it took off. The clutch had never been touched for the $7,400 we spent. Upon closer inspection we found the inner primary cover to be completely cracked from his misuse in tools equipment. These small mistakes could hurt someone who doesn't know how to work on their own vehicle. My father put in a lot of money to get this bike fixed and when he was promised he would be able to ride it to Sturgis he was excited. This will not be able to happen this year or probably next due to this man's poor work ethic and bad quality of the work he does complete. I do not recommend going to this man or company for work on your bike. He will simply take advantage of your money and your time. PS. DONT GO THERE.

Had Dan do a top end overhaul on my old road king for a substantial amount of money and the engine…read moreshelled out as a direct result of his shoddy work after less than 5000 miles. Score marks all over the inside of the cylinders that forced me to abandon the bike in the middle of a road trip to Sturgis. DO NOT TAKE YOUR BIKE HERE FOR ANY REASON!!!

Very dependable shop goods service prices and mechanical skills. Works on domestic and imported…read morebikes.

I took in my Kawasaki Z400 for a tuneup and new tires. Not only did they get me in quickly, but…read morealso found several other issues that I didn't know I had. My bike has never ran better thanks to them! Very knowledgeable group of men working here! Thanks for the hard work and will definitely be returning.