Five star service and product. So happy I used them! After a thorough search for a great powder…read morecoat company in the Santa Barbara area we chose Santa Barbara Industrial Finish and couldn't b happier.

Tommy and his crew crushed it on my yz 250 frame and swing arm. The finish is so perfect and smooth…read moreeven though it had 10 years of use. I'll definitely be bringing more parts here. The price and customer service is unbeatable. Thanks a million SB Industrial Finishing!

Yes these guys are good old fashion crooks! I am from Chicago and have dealt with good welders for…read morea long time. I also know a crook. How about this. How much to weld two sides of a 2x6 inch box? Not form the box, not make the box but just weld. Would you believe over 350 dollars!!! The owner looked me straight in the face and said that number. The box cost 50 dollars and the weld must have been done in gold! He tried to tell me an 1.5 hours for setup. If it takes that long to set up two 6 inch welds then be careful with your project. If you have something to weld go elsewhere.

From initial phone contact with the office manager at Delta Welding and Fabrication to completed…read morework, my experience was very good. They were pleasant and easy to work with, knowledgeable, they did quality work at a fair price, and completed the project quickly. I recommend their services.

M&J These folks just…read morecontinue to do great. Monte gets it, particularly for prototype runs. His abrasive machines (not him, he is very pleasant) can shape anything you provide -- except politicians. So if you need to graduate from maker to industrial scale, go here. W

What can I say. Monte is awesome! I brought him some monitor stands/brackets that I needed to cut…read morewith an odd shape but Monte came through and did a professional job. They came out awesome and the original paint didn't came off during the water jet. Man if it weren't for Monte, my stands would still be in the box trying to figure out where to cut them! Quality was really professional and he truly cares about what you want. He cut me an aluminum template piece based off my paper one and told me to take it home and check it to see if it fits before cutting. I raced home, checked it on my monitor and bam perfect fit, alignment was great, went back to Monte, and the rest is history. Outstanding job. I highly recommend him!

The service was excellent! I highly recommend Montie Wayne Sheet Metal & Heating…read more 1) Paul, the estimator arrived timely and gave the best estimate. He was very respectful and gave honest information. He explained the permit process well. 2) The guys that they sent out to replace the furnace were courteous , respectful, did a great job AND cleaned up when finished for the day! What a pleasure to have workers from an honest outfit! 3) What a relief to have heat back in the house! Thank you guys!

Montie Wayne Sheet Metal is an awesome locally owned company. They took a look at my older AC unit…read moreand helped determine if any repairs were needed before the hotter summer months. The service was super fast and all of my questions were answered. Very professional and very knowledgeable. I highly recommend them!

Would not recommend at all. They were to remove our old furnace and then put a new system in the…read moreattic. Rightaway, they made a complete mess. When I complained the owner aggressively defended his crew. Opposite of the customer is always right. They specifically agreed to put the new unit where I wanted it in the attic, I got NOTHING of the kind. They just stuck where it was easiest/quickest for them. When I balked, THE OWNER'S snap reply was that the person representing him at the time was no longer with them. Now it is almost impossible to access the furnace. They ran the furnace exhaust pipe to a completely different roof vent, again, one that was easier. The FILTER HOUSING was BOTCHED - they put in using sheet larger head metal screws that PROTRUDED INTO THE FILTER HOUSING such that the replaceable pleated filter's frame was crushed. An air diverter was put on the wall without using the new painted screws; instead they used fugly sheet metal screws AND screwed them in so tight the register doesn't set flat on the wall. Poor value for the money

DO NOT hire these guys. We hired Rick's when the heater quit. The problem it turned out was a…read moreprevious owner installed an extra air filter outside the furnace and it was clogged. Before diagnosing the actual problem, the guy they sent tried re-wiring the thermostat, then had to re-re-wire it when he realized that wasn't the problem. The tech phoned home and had someone walk him through the repair. In the call, he noticed the second filter, removed it and "bingo" the furnace worked. So problem solved right? Not quite. For reasons unknown, the tech decided to use a screwdriver to pry the squirrel cage off the fan that cools the motor and broke it. He said it was no big deal and would return with a replacement. Two weeks and a phone call later, no replacement. The person I spoke to on the phone told me the heater was old and somehow they weren't responsible for breaking the squirrel cage. Now the furnace is really loud and it wasn't before. I just received a $334.00 bill from them. Look elsewhere for reliable service.

Excellent work. Very friendly and courteous service. Good eye for design and reworking wrought…read moreiron. Would use again.

From the owner: 25 years welding experience, custom parts,welding, fabrication,gates,Handrails,car repair,trailer…read morerepair,tractor repair,custom art, Instagram @k_fab_welding pics available

Great service, politeness and on budget. They fixed my roof after recent rains and did a great job…read more I would highly recommend them for roof repair or replacement.

The service in their metal shop is outstanding. I stopped by…read morein my search for custom edge metal. I didn't get his name, but the guy made my stuff to spec while I waited. I was there and gone in like 20 minutes. What a great source. Thanks guys! I'll be back.