A year ago or so my roommate blew my head gasket on on my datsun truck and I needed to get the head…read moremachined.... He destroyed the gasket/head so bad I initially thought he cracked the block. I had gone to poynor machine for some simple jobs, but this was the my real first machining job with them. Poynor is a small shop, I think run by one guy (another dude works for him?). You walk inside and he has parts scattered around; various projects all going on at once, he touches all of them. Really the way a machine shop should look and feel. I decided to go with Poynor for this job because: (a) only machine shop I know of in the tri-cities (b) He is upfront about his work (c) Reasonable turn around (d) Reasonable quotes. I couldn't be any happier with the work he performed. He agreed to inspect the head first and to let me know if it is repairable, for free. He then provided me with a quote and asked if I would like to pursue the work. He told me he had a few projects going so it would probably be a week till it was ready, which I was fine with. and I gave him the go ahead. Within 3 days the head was milled, a complete valve job was performed, new seals were installed, and pressure/leak tested. All for only $250 (that is cheap). I installed the head and I happy to say the truck runs better than it used to and I get solid high compression in all the cylinders. Literally revived the truck from the farthest reaches of hell. Only thing that sucks, is now I live in Seattle and need another head machined.

I like Tacoma Screw as a company and use them wherever I travel for work but this one has…read moredisappointed me several times. Maybe I'm too small. The local Ace Hardware store fixed me up and saved the day.

Pleasant and courteous is the reception I received. Heads up to grande rhonde Off Road recovery for…read morethe recommendation.

From the owner: Complete Automotive Machine Shop Service - 33 years read more

Our company was searching for a reliable machine shop and came across M&J Manufacturing. We were…read moreimmediately impressed by their professionalism and the quality of their work. We deal with very precise, complex parts, and many other shops were hesitant to take on the job after reviewing our drawings. M&J not only accepted the challenge but delivered excellent results. We highly recommend this shop.

They treated me so well! I had my 1969 Chevelle heads get worked on and it came out great! I have…read morenever had a manufacturing place do me as well as M&J did! I highly recommend them to work on any of your cars!

I went to this machine shop with a small one-time project. I should have noticed the warning…read moresigns: (No estimate as to how long the job would take AND no estimate on the cost of the project). After nearly two weeks with not hearing any word from the shop, I decided to pull the project. The work they did perform was, (which wasn't 1/2 of what was expected to be done), two cuts on two pieces of pipe and ream out 4 fittings to fit on the pipe. I was assured that the ream job would fit onto the pipes. After getting home I discovered that three of the fittings would not fit at all on the pipes. In the end what it amounts to is that I paid $65.00 to have them saw off two ends of pipe.

From the owner: Welcome to Capital Machine! We provide machining, welding, and fabricating services to a variety of…read moreindustries. Whether for prototype or production, we use a variety of techniques to make your project. We also offer metal fabrication, welding, machining, and plasma cutting. For more information, call us today!

I had Dan build me a 235 inline 6 for my 1951 Chevrolet 3800 long bed pickup that was the service…read moretruck for the first Chevrolet dealership in the Pacific NW. It is an untouched survivor, a rare truck that sat idle since 1974. It is a very important special truck. I explained that I needed it to be as factory correct as possible. He understood the importance of the build and produced a beautiful engine. He cleaned the original 2 stage fuel pump to perfection. He kept me in the loop during the build showing me photos of the process. I was not able to be there when he ran it for its break in period but did send a video showing pressures and operation. The attention to detail was outstanding and the paint job was perfect. The engine ran perfectly. There was one slight leak that popped up ( happens) but Dan stood behind his work, fixed it and I could not be happier. I highly recommend Dan for his engine rebuilds. In today's world it is hard to find a reputable, honest machine shop. You can trust Dan. I am Washington states collector car appraiser and ex Concours judge. I am very picky with respect to my vehicles. Thank you Dan for finishing off this very special truck Greg Prince Prestige Collector Car Appraisal

Bought a 235 engine from Lcc on eBay. He reached out to me right away asking me what car it was…read moregoing on. Me not knowing a later 235 would need modifications for it to fit the car it was going in. He built me a 235 and without asking modified it don't can bolt straight into my 1948 Chevy. Gave me a warranty and shipped it beautifully. love my engine and she's running strong. I highly recommend them

Great trust worthy people. Reasonably quality work. Excellent prices! I don't know how they keep…read moremanage to keep the prices so low but yet great quality. I only buy from them. Good luck!

I haven't hired out to this company yet...but after checking out a couple of CNC shops, this one…read morebeing the first, I went home still unsure. After fumbling around my property for some time I noticed a vehicle had pulled in. My thought was amazon delivery of some sort. I was taken back by finding the owner of Clear-Cut standing on my porch with my wallet that I had spaced and left earlier in his office. I don't leave reviews often but this calls for sharing. D. Brant

From the owner: We specialize CNC Turning and Milling. Prototyping/tooling to small batch production runsread more

First of all, Penny is an amazing lady, friendly, knowledgeable and helpful…read more. Powder coating of my 1965 terribly corroded tractor wheel centers came out amazing. They are a busy business, but that just means they are good, so don't expect same day service. Good does not come fast. Everybody gets fair and great service. I just had some wheel weights powder coated, and despite them being heavy and hard to manage, they did a good job again. I would recommend Finish Line to my friends, and others.