Was referred to Daniel by a coworker who has been a long-time customer of his…read more Daniel was extremely communicative throughout the entire process of the repair. He was always available through calls and texts, and even sent me progress pictures. He is a far drive for me, but I will definitely be back to complete some other enhancements on my vehicle! I had shopped around and decided to go with him not only because he quoted me around $1000 less than other places, but also because he is known for his flawless paint matching and quality of work. When I went to pick up my vehicle, he mentioned that I can bring it back after 2 months or so and he would help me buff it out since the clear coat can start coming off since it needs to cure. So, I brought it back and he completely buffed out both panels he had worked on.

I used Daniel's business, the Coating Place, previously to customize my Audi A6 and am happy with…read morehis work. I reached out to him to find out what he would charge to fix my wheels because they cause vibrate at speeds over 60 mph. I reached out to a couple of other businesses to have this done, and their prices were much higher, and I had no prior experience with them therefore, I decided to go with the company that I have had previous experience. Initially, I was going to leave my car so that he could do both wheels the same day and pick up my car tomorrow but I think I'll have him do both and per our conversation he should have them ready tomorrow. I will edit this post tomorrow with the final result & a rating. You will see before and after pictures. GN3

They have done excellent job fixing the damaged anchor attachment of my iron fence. Their…read morecommunication was very responsive and thorough. Highly recommended.

After having about 11 people come by to provide bids I started looking for company to help rebuild…read morea fence that can do both wood and metal because I wanted a half metal half wood fence. I decided to go with them because their bid was the lowest but looking back there were a lot of red flags from the beginning of the communication process with this company that I should have considered. For example the owner sent me a side message saying if he were to respond to my message it would cost him $70; and just based on what I dealt with they do not seem to be a established business based on communication, the amount of nickeling and diming done and the final product. For the whole fence, I provided him with a picture of what I wanted specifically for the gates and some images circled and let him know I wanted it to be as long and continuous as possible with only metal cut offs where they needed to be and any extra support can go in the back. He also provided me a picture that had a lot of metal around the edges and I didn't not like that and stated it was too much metal and again provided him with my photo. This was the only conversation we had about the gate and when it was constructed it looked like the photo he sent vs what I sent. And instead of acknowledging his error he was rude and combative and his brother had to step it. That was the begging of a whole lot of other issues especially them nickeling and diming me for all of their errors that were a result of terrible communication from him. They charged me a flat fee to build the fence "professionally" and it looks a mess, there is nothing professional about it and also tried to hit me with fees for stuff that was included already in the price to rebuild so that is why I know they are a new business. The slide gate is not sturdy and they had to cut a whole in my other wood to make it functional, that I did not know about. They also installed the sensor wires on the outside which could easily be cut even though I expressed safety concerns throughout the whole process. When they were installing the sensors I was outside because they were 2 hours late and it was getting dark so I had my car headlights on and he never asked me anything about it and when I spoke to him about the placement he said it would delay the project and he needed to do what was best for him. After the wood sat in the sun for like 3 days the slide gate stopped closing because the sensors shifted and sounded an alarm with an error code of 71 every time you tried to close it. The only way to close it was to hold and after contacting him he blamed it on me after not responding for 2 days (see attached convo). I had lift master come out to fix it and it turns out they were a lot of issues like not installing all of the wires correctly etc. one of his friends did the install so I am not sure they were fully authorized to do it. The walk-in gate looks awful it was not measured correctly and it is not fully functional. He also agreed that the gate/fence does not look right which is also my fault according to him because I purchased my own wood (see attached convo). He also told me that it was "hard to install gates" and that he would have had to do extra stuff to make it even which was like what do you mean that's what you were getting paid for! For every complaint I had his response was, it's going to cost you to fix it. They just left me with whatever and now I have to deal with it. Now that the wood has been rained on and has settled the walk-in gate no longer stays closed at all and randomly opens. I provided them with the lock well beforehand and it's not operational. They screwed the key frame into the slots that the other wood is screwed into so the nails do not stay in place and a part of it has cracked off due to the gate slamming when it opens by itself. The metal part that is supposed to latch does not fit so it just does not stay closed. They also did not add support beams to the back of the fence so the fence bubbles out and caves in and is wobbly in certain places, especially places where the metal posts are because there are no screws there. Overall the did an awful job and they left me with a mess that killed my grass and and did not not finish painting. There are sooo many other things that I can highlight but this review is long enough and I can only add 10 pictures! 10/10 do not recommend!

I was told a different price from when I got there by word of mouth. I was told of an estimate that…read moreI'd be paying and was happy with. 3 weeks later he gives me a price no where near what we discussed then saying he never agreed or even talked about the price. He lied and called his customers liars when I talked to someone who got their work done by them as well. Also my faces had a center piece and they told Me it would fit even after the coating and they don't .

Josh recently restored our Chair King patio table and it looks amazing! Not only was he very…read moreresponsive, via email and phone calls, but he picked our table up and delivered it a few days later, looking better than it did when we bought it. I highly, highly recommend him and his team.

Cross coat does all my powder coating for my business. The service is top-notch. The quality of the…read morePowder Coating is the best. Definitely give Brandon a shot. He will not disappoint you.

From the owner: We specialize in Sand blasting and Powder Coating. We have experience in everything from outdoor…read morefurniture, automobile parts, auto frames, machined and fabricated parts, etc... You name it, we can sandblast and powder coat it! Call for free quote!

Houston powder coatings, coated a gate that I built to take to them.. OH! BOY!!! Did they do me…read morewrong!! This is the worst powder coating I have ever seen in my life!!! I have pictures and videos of their work... I DO NOT RECOMMEND THIS PLACE OF BUSINESS. Take your business elsewhere..

We had Houston Powder Coaters repaint and re-fabric 4 outdoor rocker/swivel chairs and are amazed!…read moreThe items are 15+ years old and now look brand new. We're having 2 matching chaise lounges done now. The furniture originally was high end quality and it would have been much more expensive to purchase new furniture of the same quality. We're very satisfied!

Service was great! Business was able to work with me. Definitely planning on returning. I recommend…read morethis place.

From the owner: Houston Coatings Powder Coatingread more

This is the second time I have used Ron's Sandblasting for my Toyota Landcruiser project. After…read moretalking with the team, they knew exactly what to do to make sure the panels didn't warp due to heat. They did a great job of blasting all the old paint and rust down to bare metal and applied epoxy paint. The price was more than fair and way lower than anyone else I contacted. I would recommend them to anyone.....and have.