Welded a fix to an old convertible dolly for me that was my uncles. Great service and a fair…read moreprice. Highly recommended!

My 2019 Forest River travel trailer developed a crack in the frame where the axle bracket is welded…read moreto the frame. I spent several months going through inspections with their authorized service center and had to wait while Forest River and the frame manufacturer developed a repair plan. In the end, the service center was unable to do the repair and my alternatives were to either drive my trailer to their plant in Indiana or find a local welder. Jeff at Furrion has great reviews and a friend also recommended him. He developed a plan similar to Forest Rivers' and repaired the cracks (he found a crack starting on the opposite axle weld as well) and welded 30 x 4-1/2 inch 1/4 inch plates on both sides of the frame, as well as some 2 x 2 angle iron to reinforce the frame both in front of and behind the axle welds. I am extremely happy with the results of the repair and will not hesitate to have Jeff do any future repairs or fabrication I might need. Forest River has also stepped up and agreed to reimburse me the cost of the repair as it met their plan specifications. I would add that another RV repair shop that does perform welding services refused to even attempt this job. Thanks again Jeff!

Old world blacksmithing in Portland, OR…read more First their work...many of the iron work at McMenamin's, Lucky Lab, etc. are made by Dan and Heidi. Looking through their portfolio its really amazing what they can do with metal, hammer, chisel's, and anvil. Second...I had the chance and pleasure of taking a class from Dan. It was over two days and its an introduction to the art of blacksmithing. First it was FUN!!! Second Dan is a great teacher...I'm sure I tested his patience as I'm not good with my hands at all...but eventually got the hang of some of it. I'm excited to get into it. With Dan's direction I got to make several simple tools and projects that taught me the basics for forging...we even got to fire up the coal forge and I got to forge weld a chain. Sparks flying everywhere!!! At any rate...if you're interested in a very HIGH END iron work (keep in mind they are forging not welding pieces together) then keep them in mind. If you've ever thought of doing it from watching those movies...take the class! Its fun and you'll be amazed at what can be done.

I just finished a basic blacksmithing class with Dan and it was great! Lots of fun, very…read moreinformative, and a ton of great hands on work. I was shocked at how quickly I was able to improve under Dan's keen eye and guidance. He was also very understanding of my soft computer programming hands as I worked to understand hammer and anvil techniques.

Lifesaver for Boat Trailer Repairs & Master Craftsman!…read more When the winch stand on my boat trailer failed with 800 miles to get home, I needed emergency welding help fast--and finding someone with true expertise is no easy task. Finding this shop was absolute gold. * The owner is a retired pro whose decades of experience and precision craftsmanship shine through instantly. His homebase shop is an impressive setup packed with numerous specialized welding machines and gear--it's clear at a glance that he has mastered working with all kinds of metals and complex structural problems. You get the immediate sense that he can diagnose and figure out a solution to absolutely any problem you throw at him. * Beyond the exceptional repair work, spending time at his shop was a highlight in itself. He gave me a fascinating tour of his space and is a phenomenal storyteller. (Ask him about the story behind fixing Jesus... you'll have to hear that one for yourself!) * Top-notch skill, incredible turnaround in a pinch, and fantastic company. If you need expert welding done right the first time, look no further.

He handled a delicate repair while I waited. He did an excellent job; friendly and easy to work…read morewith. Would absolutely recommend and use again!

Dustin is your guy!…read more I own 2 fitness studios here in town and one of my ballet barres was broken. He came i the same day, gave me a quote and then met me early the next morning to fix. His customer service is amazing, his work turned out great, and I will no doubt continue to use him for my business's. Also, he's super funny and has a great energy. A bonus!

FLO FAB EXTREMELY Accommodating, really great customer service! IF YOU HAVE A PROJECT OR ANY WORK…read moreWELDED Dustin is A PRO! He is also a lifesaver. He didn't charge me full price knowing i had gotten ripped off somewhere else, FAB Flo helped me out on a Friday afterhours with just a phone message, he contacted me within 5 min! Then agreed to do it that day... A friday night. He completed the project in a very very short time! It was done very well this time by Fo Fab! after having been done by another welder and paid for a very crappy job, it turned out crooked not even square. So Flo Fab really came through. AND did it for a reasonable price even though it could have cost me in the hundreds somewhere else!

Amazing service, front desk girls are super nice and helpful, very reassuring and had my order done…read morein no time ! I'm coming back for sure!

Excellent Company. I've used Montavilla Sheel Metal for years. They're professionals, they know how…read moreto get the job done and they've never let us down. I would highly recommend Montavilla sheet metal for your next project!

I bought a used drill press and needed a bit of advice regarding the chuck. Jim at Barbo not only…read moregave me some free advice, but superior service. I first needed a new belt, luckily one they had in stock. I wound up going back to buy a new chuck and he helped me remove my old one from the taper. Made my life easy. He also had some referrals for parts he couldn't carry. I've bought tools from Barbo before and will continue to do so. You will get great service and a fair deal from Barbo. It is worth checking out their new and used equipment. And don't forget to ask for Jim. They are old school. Honest and fair. Mark

Sales person was rude and condescending. Asked a simple yes or no question about a used machine I…read morewas about to purchase (Will you walk me through one aspect of how this particular machine operates when we purchase it?) and he chose to give me a long-winded insult in his most condescending tone instead. I see no value in buying equipment from them If they can't be civil and also can't provide even a fraction of the service the other sellers do. You have to be able to maintain/repair any piece of equipment you own anyway, so any claim they make that they made sure the machine works is useless. You may as well buy it used from the seller for a fraction of the price before they scoop it up and charge you more.

Fantastic! Jim is very skilled and really went above and beyond for a small one-off project. He…read morepatiently walked me through my options and provided valuable advice. Attention to detail is top notch and the finished product is beautiful! I will definitely be returning if I ever need anything else polished.

Jim was awesome and did such great work on my valve cover. I sent in a request for a quote and he…read morecalled me back the same day. I dropped my cover off that same day and in less than 24 hours it was ready for pickup. He went above and beyond polishing and didn't even charge for the extra time above his quote. I'd recommend him for any metal polishing you need!

Wonderful experience with Electro-Chem in Portland, OR. I brought them 2 small parts to be…read morestripped, re-anodized & dyed, and they were very courteous and took the time to work with me and to listen to what I wanted the parts to look like when completed. Not too many anodizing shops are willing to take on small jobs. These guys did so with a smile and the finished product exceeded my expectations. The price was very reasonable and the turnaround time was quick! Highly recommended. Thanks again guys!

We have a project we are working on and wanted to send 25 prototypes for anodize, with a quick turn…read morearound time due to project deadlines and boy did they deliver! The job came out great and they were so quick!