John At TANK IT is the best In the business. My tanks fit perfect. The weld quality is second to…read morenone. Every detail is top notch. Turn around time at the busy part of summer was amazing. Less than 3 weeks for 2 large custom tanks. That included the design phase as well and all my initial calls asking questions. If I knew what I was doing it probably would of been 2 weeks!. We arrived after a 900 mile drive and his hospitality was old school. No one DOES THIS ANYMORE. If you need fuel tanks and or anything manufactured rest assured John will handle it with zero issues.

Super professional and ALWAYS on time which is rare for someone in this industry. Would totally…read morerecommend if you are looking for high quality work done right the first time.

These guys are great to work with. If you have a business or are an amateur like me, they are…read morealways helpful and they know what they are doing. My wife and I have had several different jobs we needed help with they always had a solution, and their prices are always reasonable. There are very few businesses in Lake Havasu that are as friendly and helpful than these guys. We highly recommend them.

Reading the only review posted here made me laugh. The customer clearly has too much time on his…read morehands. For the amount of cuts he was expecting to be done, that was an incredible price as in low cost. Sounds like the shop tried their best to do it but were not able. Offering to pay the customer the $60 was as generous as anyone could hope for. I hope he found a capable shop and that they told him how much it would cost to have it done. Sounds like it would much more money.

Worst metal fab company..... he want the most expensive or the least expensive but nice guy and…read morelead time was good.... ended up taking months to get my fences and when I finally did they were awful and not mounted to my property correctly..... Final word from Trevor would come fix to the best of his ability..... which didn't give me a reassuring feeling.... offered to take them down & return my money but that would have left large holes in the side of my house.... Could not find anyone that wanted to try and fix them because if such more workmanship..... had to start over and order new gates.... TLC Metal is not a licensed contractor.....

Aaron did a stellar job he fixed our broken old gate in a great timely manner he also did it for…read morepayment via zelle . Great company and craftsman

From the owner: At Aaron’s Custom Metalworks, LLC we specialize in metal fabrication, welding, decorative paneling,…read moreand CNC plasma cutting. We take pride in delivering beautiful, high-quality metalwork to our clients. We believe that our work is not just a reflection of our skills, but also an expression of the unique personality of every customer. Our custom designs are tailored to meet your desired specifications, while our competitive prices make sure that you get the best value for your money. Our goal is to provide personalized customer service that leaves a lasting impression and ensures that you always come back to us for your metalwork needs.

Brian should not be in customer service. Paid almost $600 for a small generator box. gave them the…read moregen model # and exact dimentions. Box arrived and the top width was 10 3/4'' wide and the gen is 11 1/2'' wide. It will not fit. Brian blamed me, the customer, that has never built a box before for the box being to small. The problem is that they did not add an inch for the front latch and hinge because they stick out in the way of the opening. He blamed me for that? How was I supposed to know the latch and hinge would be sticking out? I gave the exact inches of the gen. Also he said I would be getting a heavy duty boat hatch lift spring so the box would stay opened, instead I received a 1/16'' cheap flexable cable. He said it was 50% my fault and to pay $100 for shipping again. The box has 4 bolts on the bottom and the only way to get the light 48lbs gen in and out is to remove the 4 bolt and nuts each time instead of opening the lid and putting my gen in the top. When I ordered it he was nice and said any problems call me and when the gen would not fit I called and he was rude and blaming me for not knowing his job. I wish I never heard of this company because of the way they treat their customers.

Brian and his Personnel were outstanding with my first "Tool Box/Fuel Tank" 2 years ago on my 2018…read moreGMC Sierra. I returned on 12/15/20 for my 2nd custom tank on my 2020 GMC, Long Bed Dually. Brian and his crew fabricated this tank to fit under my "American Truck Cover" tool box/bed cover combo. An absolute exact fit, giving me an additional 95 gallons of fuel. Gauge and switch were placed inside the center console of the vehicle, giving it a clean and professional look. These guys did an outstanding job, building and completing the install all in one day. This was well worth my trip from Phoenix.

We broke a Leaf Spring hanger on our Fifth wheel. Matt came this morning and fixed us up. He even…read morebeefed up the hanger with another piece of iron. He did both sides. Quality of work was excellent and the price was right!! He was respectful and courteous and the best part is we didn't have to move our rig!! We highly recommend this business!

OMG!!! Hire him! seriously! I have never hired someone so fast, great work, easy communication,…read morequick to reply and honest. He not only fixed what another welder destroyed but gave me honest advice for another big issue with a cheaper alternative that turned out way better for me!!! He picked up my boat, dropped it off and I literally I will always recommend him! Thank you so much Matt for saving my boat!!!

This was my first time ever having anything 3D printed. The finished product works and looks great,…read moreidentical to the original item made of brass...I very much prefer this material! Quick, easy and very affordable process. My mind is busy thinking of other neat items to possibly 3D print. SO COOL!!!

I needed a part printed, Mike was super-responsive, asked a bunch of questions, and did a great job…read morefor a very reasonable price. I am very happy with the whole experience and the part that he printed is exactly what I wanted.

I have a vintage Scotty trailer with an old style torsion axle. I noticed the wheel was rubbing…read moreagainst the wheel well, and the trailer was sitting lower than it should. A quick examination revealed one of the torsion springs was broken. I contacted Richard at Liberty Prop and Welding and he came and took some measurements, in the pouring rain I might add. He contacted Dexter, one of the only manufacturers that make replacements for this type of axle. There were some delays due to weather and the holidays, during which Richard kept in touch with progress reports. Richard was also very accommodating to our needs. Once the axle arrived, he had installed in a few days. The cost was as expected, no hidden costs or fees. The installation is perfect, the trailer is now at the correct height again, and it tows beautifully. Liberty Prop and Welding is a local family business, and I would highly recommend them.

Called in less than a week ago for an appointment for a scag repair. Drop the boat off at 8 AM and…read moreit was done by 10 AM with a new scag replacement and a new prop quick and affordable and great customer service. I appreciate you guys thank you so much.

Rick and his crew are the best team in the off-road world. I highly recommend using this company…read morefor all your off-road and custom fabrication work.