Quick service very polite job well done. On time very cost effective would use again.read more

From the owner: Well I repair all sorts of things such as barbecue pits stainless steel sinks or anything stainless…read moresteel fences gates carbon steel and any custom work feel free to contact me via text message or email

Excellent service from Juan! I needed someone right away to handle an emergency issue with my…read morenon-working gate, and Juan was kind enough to fit me in. He was honest, straightforward, and quick to identify the problem. It's rare to find such reliable and transparent service now in days. Juan is absolutely someone I'd recommend!!

Came on a Saturday morning two hours after I called to fix a wrought iron gate that was off track,…read morestuck and would not open. Very friendly and personable service, also affordable. Wouldn't have been able to open the gate without them. Fixed it in less than 10 mins. Also recommended a permanent solution to fix it .Thank you so much!!! Highly recommend their service 5++ Stars.

They have done excellent job fixing the damaged anchor attachment of my iron fence. Their…read morecommunication was very responsive and thorough. Highly recommended.

After having about 11 people come by to provide bids I started looking for company to help rebuild…read morea fence that can do both wood and metal because I wanted a half metal half wood fence. I decided to go with them because their bid was the lowest but looking back there were a lot of red flags from the beginning of the communication process with this company that I should have considered. For example the owner sent me a side message saying if he were to respond to my message it would cost him $70; and just based on what I dealt with they do not seem to be a established business based on communication, the amount of nickeling and diming done and the final product. For the whole fence, I provided him with a picture of what I wanted specifically for the gates and some images circled and let him know I wanted it to be as long and continuous as possible with only metal cut offs where they needed to be and any extra support can go in the back. He also provided me a picture that had a lot of metal around the edges and I didn't not like that and stated it was too much metal and again provided him with my photo. This was the only conversation we had about the gate and when it was constructed it looked like the photo he sent vs what I sent. And instead of acknowledging his error he was rude and combative and his brother had to step it. That was the begging of a whole lot of other issues especially them nickeling and diming me for all of their errors that were a result of terrible communication from him. They charged me a flat fee to build the fence "professionally" and it looks a mess, there is nothing professional about it and also tried to hit me with fees for stuff that was included already in the price to rebuild so that is why I know they are a new business. The slide gate is not sturdy and they had to cut a whole in my other wood to make it functional, that I did not know about. They also installed the sensor wires on the outside which could easily be cut even though I expressed safety concerns throughout the whole process. When they were installing the sensors I was outside because they were 2 hours late and it was getting dark so I had my car headlights on and he never asked me anything about it and when I spoke to him about the placement he said it would delay the project and he needed to do what was best for him. After the wood sat in the sun for like 3 days the slide gate stopped closing because the sensors shifted and sounded an alarm with an error code of 71 every time you tried to close it. The only way to close it was to hold and after contacting him he blamed it on me after not responding for 2 days (see attached convo). I had lift master come out to fix it and it turns out they were a lot of issues like not installing all of the wires correctly etc. one of his friends did the install so I am not sure they were fully authorized to do it. The walk-in gate looks awful it was not measured correctly and it is not fully functional. He also agreed that the gate/fence does not look right which is also my fault according to him because I purchased my own wood (see attached convo). He also told me that it was "hard to install gates" and that he would have had to do extra stuff to make it even which was like what do you mean that's what you were getting paid for! For every complaint I had his response was, it's going to cost you to fix it. They just left me with whatever and now I have to deal with it. Now that the wood has been rained on and has settled the walk-in gate no longer stays closed at all and randomly opens. I provided them with the lock well beforehand and it's not operational. They screwed the key frame into the slots that the other wood is screwed into so the nails do not stay in place and a part of it has cracked off due to the gate slamming when it opens by itself. The metal part that is supposed to latch does not fit so it just does not stay closed. They also did not add support beams to the back of the fence so the fence bubbles out and caves in and is wobbly in certain places, especially places where the metal posts are because there are no screws there. Overall the did an awful job and they left me with a mess that killed my grass and and did not not finish painting. There are sooo many other things that I can highlight but this review is long enough and I can only add 10 pictures! 10/10 do not recommend!

Great experience with JS Welding and Fabrication. Communication was easy, they showed up on time,…read moreand the work came out perfect. I had them fix my gate so my dogs couldn't slip through the gaps, and they nailed it. Super clean work and exactly what I needed. Highly recommend.

High quality work, good pricing, professional service, and took care of me in a pinch. Highly…read morerecommend using JS Welding for any of your welding needs.

Had preexisting window bars converted to bars that matched and had safety release mechanisms for…read morefire escape so I could get approved for homeowners insurance and so I could refinance They did a great job for a reasonable price and were easy to communicate with They listened to my ideas and worked with what I have WITHOUT trying to upsell me for all new window bars Thanks Ron ! Yall were great

I HIGHLY RECOMMEND ATLAS!! We needed a trailer hitch welded onto the back of our RV. Ron and Zach…read morewere awesome to work with! They were very accommodating to our schedule to make sure we were taken care of. Super nice to work with and Zach explained everything he was doing. Excellent quality job, we will ALWAYS go to Atlas for any welding job we need done in the future. Thanks again guys!